Leadmac Manufacturer & Supplier

NEWS
NEWS

Fiji Buyer Inspects 4WD Rough-Terrain Forklift at SDLD

View :
Last Update : 2026-11-21

Visit Background

Shandong Lead Mining Equipment Co., Ltd. (SDLD / Leadmac) received a buyer from Fiji at its manufacturing facility in Jining, Shandong. The visit centred on the 4WD rough-terrain forklift — the model built for unpaved yards, plantations and quarry sites — rather than the standard warehouse range.

The buyer walked the outdoor equipment yard with SDLD's sales and engineering staff, examined the machine at close range and took notes on a phone before sitting down to discuss specification.

1.jpg  
The visiting buyer with SDLD staff in the equipment yard, Jining.

Equipment Under Inspection: K35 4WD Rough-Terrain Forklift

The focus of the yard walk-through was the K35, a four-wheel-drive rough-terrain truck. What distinguishes it from a standard counterbalance forklift is visible before anyone reads a specification sheet:

  • Four-wheel drive. Power reaches both axles, so the truck keeps pulling when one pair of wheels loses grip on gravel, mud or wet clay.
  • Rough-terrain tyres. Deep lug pattern and a larger diameter than warehouse tyres, for loose and uneven ground.
  • Enclosed cabin. Glazed cab with a wiper and mirrors — the operator works inside it rather than under an open overhead guard.
  • Wide-view mast. Two-stage channel mast with the lift cylinders positioned to keep the load visible.
  • High ground clearance and a heavy counterweight. The chassis clears ruts instead of dragging on them.


2.jpg  
The K35 with forks lowered, in the yard where the walk-through took place.

The same yard staged electric counterbalance trucks, scissor lifts and site dumpers, so a visitor can compare a rough-terrain truck against warehouse equipment in one place rather than across photographs.

Application Fit: What a 4WD Truck Actually Solves

On loose gravel, packed earth or wet clay, a standard forklift loses the ability to use its rated capacity. The drive wheels spin, the chassis grounds on the ruts, and a truck rated at three tonnes stops moving three tonnes. Four-wheel drive and ground clearance address that specific failure, which is why the rough-terrain range exists as a separate line rather than an option package.

The boundary is narrower than it looks. On paved ground — even poor paved ground — a standard truck with a raised chassis and pneumatic tyres costs less to buy and less to run. A 4WD truck earns its price when the surface is unpaved all year, when the route crosses ruts and kerbs, or when a slope is part of every shift. Buyers who are unsure which side of that line their site falls on can compare the full range on the all-terrain forklift page.

3.jpg  
The buyer recording configuration details beside the K35.

On-Site Inspection: What the Walk-Through Covered

At close range the buyer examined the mast channel, cabin glazing and mounting, tyre pattern and chassis clearance, and compared the truck's footprint with the electric counterbalance units parked alongside it.

Beyond the machine itself, SDLD runs the same pre-delivery inspection sequence before any unit leaves the yard. It covers:

  • Structure and assembly. Chassis welds, mast alignment, overhead guard and cabin mounting, paint and coating condition.
  • Hydraulic and load test. Full-load lift and tilt at rated capacity, plus static and dynamic braking checks.
  • Electrical diagnostic. System voltage, insulation and charger compatibility on the electric units.
  • Engine and transmission run test. Thermal stability and gear shifting on the diesel line.

Machines are then prepared for transport — mast lowered and secured, battery isolated, unit lashed inside the container — in line with standard ocean freight practice. Overseas buyers who want this sequence documented for their own order can request the inspection record with the quotation.

4.jpg  
Examining the mast and cabin during the inspection walk-through.

After-Sales Support

Buyers visiting from overseas usually want to know what happens after the container arrives, so the visit covered the support side as well as the machine:

  • Documentation. Each unit ships with its operation and maintenance manual, parts catalogue, and electrical and hydraulic schematics for the configuration supplied.
  • Wear parts. Filters, brake components, seal kits and mast chains are supplied from the factory, so a buyer is not dependent on a local distributor's stock.
  • Remote technical support. Fault diagnosis is handled directly with the factory against the schematics and fault codes, backed by standard factory warranty coverage.

Warranty terms are confirmed at quotation and are not stated in this article. For a specification sheet, inspection documentation or shipping details, use the contact page; the electric counterbalance range is listed separately under electric forklifts.


Related News
READ MORE >>
Fiji Buyer Inspects 4WD Rough- Fiji Buyer Inspects 4WD Rough-
2026-11-21
Visit BackgroundIn [[TO BE CONFIRMED: visit date]], Shandong Lead Mining Equipment Co., Ltd. (SDLD /...
Jordanian Client Inspects Lead Jordanian Client Inspects Lead
2026-11-21
Delivery BackgroundIn November 2026, Shandong Lead Mining Equipment Co., Ltd. (SDLD / Leadmac) welco...
SDLD Forklifts Ride China Expo SDLD Forklifts Ride China Expo
2026-11-21
SDLD forklifts from Shandong: electric counterbalance, diesel, and warehouse stackers. China forklif...
SDLD Shandong Leadmac Forklift SDLD Shandong Leadmac Forklift
2026-11-21
SDLD Shandong Leadmac delivered 3.5 ton rough terrain forklifts to Africa stone processing yard. 12 ...